5050-H18 aluminum belongs to the aluminum alloys classification, while SAE-AISI T1 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities.
AISI 4140 IndusteelAISI 4140 A prehardened mold steel (311-345 HB / 33-37 HRC) with improved machinability. 4140 is a chromium-manganese-molybdenum grade designed for plastic mold industry. This grade is normally delivered in a prehardened condition at a hardness level of 33/37HRC.
Preheating:Because mold steel 1.2311 steel plate is sold in a pre-hardened condition, hardening heat treatment is not necessary. After machining and intermittently during service, the steel must be thermally stress relieved by heating to 900ºF (482ºC), equalizing and holding for one hour per inch (25.4mm) of thickness, and cooling in air to
AISI/SAE 4340 Alloy Steel- 4340 Steel Properties All AISI/SAE 4340 Alloy Steel, 4340, is a nickel-chromium-molybdenum alloy steel known for its toughness and its ability to attain high strengths in the heat-treated condition. Commercial and military aircraft, automotive systems, forged hydraulic and other machine tool applications, forged steel crankshafts.
China High Quality Custom Stamping Dies Mold Ground JIS China High Quality Custom Stamping Dies Mold Ground JIS SKD11 AISI SAE D3 DIN Crmov12, Find details about China Ground Flat, Ground Flat Steel from High Quality Custom Stamping Dies Mold Ground JIS SKD11 AISI SAE D3 DIN Crmov12 - HK JIMI STEEL CO., LTD.
China Hot Rolled Round Bar 1045 / AISI 1045 Steel, Find details about China 45# Steel Material, Tool Steel Bar from Hot Rolled Round Bar 1045 / AISI 1045 Steel - HK JIMI STEEL CO., LTD.
Factory price Tungsten Alloy AISI T1 high speed steel for saleAISI T1 (UNS T12001)is a Tungsten Alloy High Speed Steel grade of tool steel. LKALLOY is a leading Supplier of AISI T1 Steel. We mainly stocks and produces AISI T1 bar, AISI T1 flats, AISI T1 plates and other forms in various size and specifications.
H-13, P-20, 420ss - Alloy Tool Steel Inc.P-20 Pre-Hardened Mold Steel. P-20 is a general purpose mold steel designed for the plastic mold industry. With a combination of Chromium, Manganese, Molybdenum, and Carbon, unwell as being pre-hardened. P-20 is a very popular mold steel grade. P-20 is used for plastic injection and compression molds, and zinc die casting dies.
Finkl Steel® is the worlds leading supplier of forging die steels, plastic mold steels, die casting tool steels and custom open-die forgings, processing over 200,000 tons of steel each year. Our products are manufactured at four production facilities in Chicago, Detroit, Houston and Quebec.
Mold Steel - Finkl SteelFinkl Steel® is the worlds leading supplier of forging die steels, plastic mold steels, die casting tool steels and custom open-die forgings, processing over 200,000 tons of steel each year. Our products are manufactured at four production facilities in Chicago, Detroit, Houston and Quebec.
P-20 Plastic Mold Alloy Steel - Diehl Tool Steel, Inc.P-20 is mold quality alloy steel supplied in the prehardened condition. Special melting and refining practices are utilized to produce a uniform product with exceptional cleanliness. These characteristics allow P-20 to be polished to an extremely high finish required for plastic molding. The material is tested to rigorous tool steel standards to ensure uniformity of structure and
3.1.4 Cold Work Tool Steels, Identication OTypes O1 to O7 are low-alloy types that must be hardened by quenching in oil. Sizes over about 2 in. (50 mm) in cross section usually exhibit lower interior hardness. 3.1.5 Shock-Resisting Steels, Identication STypes S1 to S7 vary in alloy content but are intended for shock-resisting
Table of Steel Equivalent Grades (EN, SAE/AISI, UNS, DIN Jul 24, 2010 · Table of Steel Equivalent Grades (EN, SAE/AISI, UNS, DIN, BS, UNI, JIS) The table below compares steel equivalent grades of materials from various international specifications. Note that materials compared are the nearest available grade and may have slight variations in actual chemistry.
The Properties of T1 Steel Career TrendT1 steel is an alloy steel composed of several elements. T1 Steel is composed of 18 percent tungsten (higher than normal to promote durability) or molybdenum, which was used as a replacement for Tungsten after 1940. Chromium makes up only 3 to 4 percent of T1 grade machine steel, with cobalt being altogether absent from its alloy.
A chrome/nickel/moly alloy for joining 100,000-tensile steel. An excellent buildup or joining material on wrought, cast and forged AISI 8620 components. It is readily machinable and heat treatment should be dictated by the 8620 procedures. Uses include the joining of low-alloy steels, pipe and pressure vessels.
What Is Steel All Types Steel Alloy Steel - Songshun SteelMedium carbon steel is a good choice, which can be replaced by hot work mold steel. Adding alloy elements to cold work mold steel to improve the hardenability and the wear resistance. For dies with high requirement on wear resistance, multi-component alloy steel with carbide forming elements like Cr, Mo, W, V and etc is mostly adopted.About Mold Steel Mould Steel Selection Guide Injection Cold Rolled Mold Steel; Cold rolled mold includes cold-punching mould, wire-drawing die, cold heading die and more. Cold rolled mold steel always belong to high carbon alloy steel, its carbon content is beyond 0.80%. And chromium is a big alloy element for this steel type, its content is less than 5%.